Why is my Dreame Vacuum Cleaner losing suction?
A weak suction force in your Dreame Vacuum Cleaner could be because the dust compartment is full or the HEPA filter assembly is clogged (empty the dust compartment and clean the HEPA filter assembly). It could also be that an attachment is blocked (clear any blockages in the attachment).
What to do if my Dreame V10 charges slowly?
If your Dreame Vacuum Cleaner is charging slowly, the battery temperature might be too low or too high. Wait until the battery's temperature normalizes, then resume use.
What if the battery indicator does not light up while charging my Dreame V10?
If the battery indicator does not light up while charging your Dreame Vacuum Cleaner, make sure the power adapter is plugged in properly. Also, the battery might be fully charged and went into sleep mode, in this case it can be used normally.
What to do if my Dreame V10 Vacuum Cleaner does not work?
If your Dreame Vacuum Cleaner isn't working, it could be due to several reasons: the battery might be out of power (fully charge the vacuum, then resume use), the overheat protection mode might be triggered (wait until the vacuum cools down, then reactivate it), or the suction opening or airway passage could be blocked (clear any blockages from suction opening or airway passage).
Why does my Dreame V10 motor make a strange noise?
If the motor of your Dreame Vacuum Cleaner is making a strange noise, the main suction opening or extension rod could be blocked. Clear any blockages in main suction opening or extension rod.
What does it mean if the first indicator blinks red on my Dreame Vacuum Cleaner?
If the first indicator blinks red after turning on your Dreame Vacuum Cleaner, it means that the power adapter is incompatible. Only use the original power adapter to charge the vacuum.
General| Noise Level | 72 dB |
|---|---|
| Motor Power | 450 W |
| Power | 450 W |
| Suction Modes | Turbo |
| Dust Collection Type | Dustbin |
Identifies and labels all the components of the vacuum cleaner.
Lists and illustrates all the included attachments and parts.
Visual guide for assembling the vacuum cleaner and its attachments.
Step-by-step instructions for mounting the charging and storage bracket.
Explains the meaning of different battery indicator light states.
Details the purpose and application of each vacuum attachment for effective cleaning.
Instructions on how to clean the main body of the vacuum cleaner.
Steps for emptying and cleaning the vacuum's dustbin for optimal performance.
Guide on how to disassemble, clean, and dry the cyclone assembly.
Instructions for washing and thoroughly drying the HEPA filter and foam pad.
Steps to remove and clean the soft roller brush head for effective floor cleaning.
Guide to cleaning the mini-motorized brush head, often used for upholstery.
To Next Page
