14
Care & Maintenance
3. Remove the pre-lter rst, then lift the handle of the cyclone assembly and turn to
counterclockwise until it stops, then pull to lift out the cyclone assembly.
Note:
• It is recommended to clean the dust cup once every month.
• It is recommended to clean the pre-lter at least once every 3 months and the cyclone
system at least once every 6 months.
1
2
3
Pre-lter Dust Cup Cyclone Assembly
4. Rinse the cyclone assembly, pre-lter and dust cup until they are clean. After washing,
air dry at least 24 hours .
12
6
111
57
210
48
39
24 hrs
To Next Page
Loading...
