DreameTech VTT1 - Cleaning the HEPA Filter

18
2. Remove the HEPA filter from the
vacuum by pulling it down in the direction
shown in the figure.
4. Allow the HEPA filter to air dry for 24
hours.
12
6
111
57
210
48
39
24 hrs
Cleaning the HEPA Filter
It is recommended to clean the HEPA filter once every 4 to 6 months.
1. Remove the dust cup as shown in the
figure.
3. Clean the HEPA filter with clean water.
Make sure you rotate the HEPA filter 360°
to thoroughly and remove all dust caught
in the filter. Lightly tap the filter several
times to remove any excess dirt.
• Only use clean water to wash the filter. Do not use detergent.
• Do not attempt to clean the HEPA filter with a brush or finger.
Note:
2
1
12
6
111
57
210
48
39
24 hrs
Care & Maintenance
EN