20
2. Use scissor to cut off the hairs and
fibers that get stuck on the brush bar
head. Wipe the dust from the notch and
transparent cover with a dry cloth or
paper towel. Thoroughly dry before use.
4. Stand the roller brush upright for at
least 24 hours until it is fully dry.
Cleaning the Smart Multi-Brush Bar
1. Turn the lock counterclockwise until it
stops, then remove the roller brush from
the smart multi-brush bar.
3. When it is dirty, rinse the roller brush
with clean water until it is clean.
Care & Maintenance
12
6
111
57
210
48
39
24 hrs
EN
To Next Page
Loading...
