DANGER!
» If the grounding conductor of the equipment is not properly connected, electric shock
may be caused. If you have any questions about whether the grounding of the product is
correct, please entrust a professional electrician to check. If the plug attached to the
product does not match the socket, it cannot be modified. Please entrust a professional
electrician to install a suitable socket.
INSTALLATION INSTRUCTIONS
1. Open the package, take out the
assembly materials in the box, and
lay the main part on the ground;
2. Use two screws and gaskets to fix the
column hole and frame hole; (S340 only)
3. Plug in the power supply and use it. Use the remote controller to start the machine and
adjust the speed.
DREAVER - TREADMILL
6
To Next Page
Loading...
