Need help?Do you have a question about the Dremel 370 and is the answer not in the manual?
General| Type | Rotary Tool |
|---|---|
| Voltage | 120V |
| Collet Size | 1/8 inch |
| Weight | 1.2 lbs |
| Power Source | Corded |
Maintain a clutter-free workspace to prevent accidents.
Keep tools dry and away from flammable or wet conditions.
Ensure all visitors maintain a safe distance from the work area.
Store tools securely, out of reach of children, in a dry location.
Use the tool as designed for optimal performance and safety.
Avoid using small tools for heavy-duty tasks.
Avoid loose clothing or jewelry that could catch in moving parts.
Always wear safety glasses; consider a face or dust mask for dusty operations.
Never carry the tool by its cord or yank it to disconnect.
Use clamps or a vise to hold work securely for safer operation.
Maintain proper footing and balance when operating the tool.
Keep tools sharp, clean, and lubricated for best performance.
Unplug tools before servicing or changing accessories.
Always check for and remove any adjusting keys before turning on.
Ensure the switch is OFF before plugging in the tool.
Use only extension cords rated and marked for outdoor use.
Avoid using power tools when tired, fatigued, or under the influence.
Explanation of the tool's grounding system for operator protection.
Tool operates on 115V, AC, 60-Hz power.
Instructions for operating the chuck and inserting accessories.
Details on different collet sizes and their usage with accessories.
Guidance on checking and replacing motor brushes.
Tips for balancing accessories for precision work.
Information on the type of bearings used in different models.
Warning against using grinding wheels over 1" diameter.
Advice on selecting appropriate speeds for different materials.
Reminder to wear safety glasses when grinding or routing.
General advice to read the manual for best results and use Dremel accessories.
Illustrations of common applications for various cutters.
Description of uses for hobby, craft, and DIY applications.
Details on carbide cutters for long life and hard materials.
Information on small cutters for intricate work on various materials.
Examples of sharpening, grinding, and deburring tasks.
Description of Dremel's quality abrasive wheel points and uses.
Applications for plain shaped wheel points.
Examples of grinding on hard metals and ceramics.
Description of silicon points for hard materials and specific tasks.
Overview of accessories for polishing metal, plastic, and jewelry.
Description of accessories for sanding, shaping, and contouring.
Details on different mandrels used with polishing and sanding accessories.
Uses for removing rust, corrosion, and polishing metal surfaces.
Ideal for cleaning tight corners and polishing silverware/jewelry.
Description of the cutting wheel for slicing and cutting operations.
Description of steel saws for slotting or cutting various materials.
Illustrations of steel saw applications on metal and wood.
Holder that leaves hands free for controlling the workpiece.
Attachment for precision routing and shaping with depth control.
Press for precise drilling and routing with adjustable table.
Foot-operated and hand-operated speed controls for precise speed adjustment.
Tool for dressing emery wheel points to maintain balance.
High-quality safety goggles for eye protection during use.
Bits for routing, inlaying, and mortising in wood and soft materials.
Collets for various Moto-Tool models to fit different accessory shank sizes.
Details of the one-year limited warranty for the Moto-Tool.
Contact information for Dremel Service Center in the USA.
Information for obtaining service and parts outside the continental US.
Contact details for Dremel distributors in Eastern Canada.
Contact details for Dremel distributors in Western Canada.
To Next Page
