To Next PageTo Next Page
Need help?Do you have a question about the Dremel 300 Series and is the answer not in the manual?
General| Model Number | 300 Series |
|---|---|
| Type | Rotary Tool |
| Voltage | 120V |
| Cord Length | 6 feet |
| Weight | 1.2 lbs |
| Power Source | Corded Electric |
| Collet Size | 1/8 inch |
| Amperage | 1.15 A |
| Speed | 5, 000 - 35, 000 RPM |
Ensure correct plugs, avoid body contact with grounded surfaces, keep away from rain.
Stay alert, use common sense, wear safety equipment, avoid accidental starting.
Follow instructions, use recommended accessories, check accessory speed and size, fit arbour correctly.
Understand kickback, maintain firm grip, position body correctly, avoid sharp edges and corners.
Use recommended wheels and guards. Do not grind with side of cut-off wheel.
Steps to loosen nut, remove collet, insert new collet, and tighten nut.
