To Next PageTo Next Page
Need help?Do you have a question about the Dremel 8220 and is the answer not in the manual?
General| Battery Voltage | 12V |
|---|---|
| Battery Type | Lithium-Ion |
| Variable Speed | Yes |
| Battery Capacity | 2.0 Ah |
| Warranty | 2 years |
| Power Source | Battery |
| Collet Size | 3.2 mm |
| Accessory Change | EZ Twist Nose Cap |
| Charge Time | 1 hour |
Explains the meaning of safety alert symbols and signal words used in the manual.
Provides essential safety rules for operating power tools, covering work area, electrical, and personal safety.
Proper usage, care, and maintenance procedures for optimal tool performance and longevity.
Guidelines for safe and effective use, charging, and maintenance of battery packs.
Information on tool servicing, replacement parts, and professional repair services.
Guidelines for selecting and using accessories safely, ensuring proper fit and condition.
Precautions for keeping bystanders safe and proper techniques for holding and controlling the tool.
Advice on securing workpieces and managing the power cord to prevent accidents.
Understanding and preventing kickback, a sudden reaction causing loss of tool control.
Specific safety measures for grinding and abrasive cutting-off operations.
Specific safety guidelines for using wire brushes to prevent injury from flying bristles.
Includes GFCI use, tool care, handling, and battery insertion safety.
Instructions for safe operation, charging, and maintenance of the battery charger.
Specific warnings related to charging battery packs, including temperature and condition checks.
Information regarding radio frequency interference and compliance with FCC rules.
Guidelines for safe battery handling, storage, and environmentally sound disposal.
Explains various symbols used on the tool, such as voltage, speed, and power indicators.
Details symbols related to electrical current types and safety construction standards.
Symbols indicating battery recycling programs and user alerts for reading manuals or wearing eye protection.
Symbols for safety listings and certifications from organizations like UL, CSA, ETL, and NOM.
Overview of the rotary tool's features, including controls and key components.
Details on the charger model, charge time, voltage, and battery pack capacity.
Instructions for using the collet nut and the integrated EZ Twist™ wrench for accessory changes.
Information on different collet sizes and how to identify them for proper accessory fitting.
Overview of the rotary tool's capabilities and basic principles of operation, emphasizing speed.
Guidance on how to hold and operate the rotary tool for optimal performance and control.
Instructions for turning the tool ON and OFF using the slide switch.
How to adjust the tool's speed using the variable speed adjuster for different applications.
Tables providing recommended speed settings for various accessories and materials.
Explanation of when slower speeds are necessary for specific materials or applications.
How to interpret the fuel gauge lights to monitor battery charge level.
Procedures for correctly inserting and removing the battery pack from the tool.
Understanding charger lights and important notes for proper battery charging.
Step-by-step guide for using the 1-hour charger to charge the battery pack.
Explanation of the green indicator light during the charging process.
Recommendations for professional servicing and safe cleaning procedures for the tool.
Indicators for battery pack end-of-life and the need for replacement.
Recommendations for selecting appropriate extension cords based on tool amperage and cord length.
Importance of using correct collets for various accessory shank sizes.
Types of mandrels and their use with polishing accessories, cutting wheels, and sanding discs.
Information on high speed cutters and tungsten carbide cutters for various materials.
Details on engraving cutters, silicon carbide, and aluminum oxide grinding stones.
Information on wire brushes for cleaning and diamond wheel points for detail work.
Use of bristle brushes for cleaning and polishing accessories for smooth finishes.
Guide to sanding discs, drums, and proper pressure for brush use.
Use of grinding wheels for deburring and cutting wheels for slicing operations.
Details on tile, spiral, drywall cutting bits, and HSS drill bits.
Information on diamond tipped bits for glass and the collet fan for visibility.
How the Dremel chuck simplifies accessory changes without needing collets.
Correct methods for mounting felt tips/wheels and emery cutting/sanding discs on mandrels.
Procedure for replacing sanding bands on the drum sander and ensuring secure fit.
Step-by-step guide to installing cutting wheels and other accessories using the EZ Lock™ system.
Instructions for safely removing accessories from the EZ Lock™ mandrel.
Procedure for attaching sanding bands to the EZ Drum™ mandrel.
Instructions for safely detaching sanding bands from the EZ Drum™ mandrel.
Recommended speed settings for various materials when using high speed cutters and engraving cutters.
Recommended speeds for diamond points and tungsten carbide cutters.
Recommended speeds for carbide cutters and high speed router bits.
Recommended speeds for silicon carbide grinding stones and abrasive wheels.
Recommended speeds for cutting accessories and polishing applications.
Recommended speeds for wire brushes and sanding bands/discs.
Recommended speeds for flapwheels and finishing abrasive buffs.
Recommended speeds for detail brushes, drill bits, and grout removal bits.
Steps to follow for returning a product under warranty for repair or replacement.
Conditions and damages not covered by the warranty, and disclaimers of other warranties.
