To Next PageTo Next Page
Need help?Do you have a question about the Dremel 400 Series XPR and is the answer not in the manual?
General| Speed Range | 5, 000 - 35, 000 RPM |
|---|---|
| Voltage | 120V |
| Power Source | Corded Electric |
| Collet Size | 1/8 inch |
| No Load Speed | 5, 000 - 35, 000 RPM |
| Warranty | 2 years |
| Cord Length | 6 ft |
| Length | 9 inches |
General advice for maintaining a safe and productive workspace.
Guidelines for safe use of electricity and tool components.
Advice on attire, alertness, and avoiding hazards during operation.
Proper handling, maintenance, and usage principles for tools.
Guidance on tool service and additional rotary tool safety rules.
Instructions for verifying all parts are present after receiving the tool.
Overview of the rotary tool's features and capabilities.
Basic electrical and motor performance attributes of the rotary tool.
Safety for power connection and guidance on extension cords.
Information on different collet sizes and their identification.
Step-by-step instructions for replacing collets and accessories.
Instructions for installing and using the keyless chuck.
Guidance on how to hold and operate the rotary tool effectively.
How to select and use appropriate speed settings for different tasks.
Recommended speeds for various cutters and carbide tools.
Recommended speeds for router bits and grinding stones.
Recommended speeds for abrasive points and sharpening stones.
Recommended speeds for cutting, polishing, sanding, and buffing accessories.
Recommended speeds for drill bits and grout removal bits.
Instructions for inspecting, replacing, and seating carbon brushes.
Guidelines for safely cleaning the rotary tool and its parts.
Bits for drywall, tile, general cutting, and router bits.
Mandrels and various grinding stones for different materials.
High-speed cutters, engraving cutters, wire and bristle brushes.
Sanding discs, flapwheels, buffs, and grinding wheels.
XPR MultiSaw, XPR Planer, and Flex Light attachments.
Flex Shaft, Plunge Router, Grout Removal, and Cutting Guide attachments.
Lawn/Garden Sharpener, Chain Saw Sharpener, Right Angle, Dremelite.
Information on Flex Shaft Tool Holder and Tool Holder and Base.
