Dremel 400 Series XPR User Manual

21
ATTACHMENTS (continued)
Tool Holder and Base
• Firmly holds rotary tools in any position
• Control workpiece (hands free) for better results
Use with models: 275, 285, 395, 398, 400 Series XPR.
Use with models: 275, 285, 395, 398, 780, 400 Series XPR.
Flex Shaft Tool Holder
Conveniently suspends any Dremel rotary tool above your work-
bench.
• Perfect for use with the Flex-Shaft attachment
• Clamps to workbenches up to 1-3/4" thick, and adjusts in height
from 12" to 42"
• Store extra bits on base

Dremel 400 Series XPR Specifications

General

Speed Range	5, 000 - 35, 000 RPM
Voltage	120V
Power Source	Corded Electric
Collet Size	1/8 inch
No Load Speed	5, 000 - 35, 000 RPM
Warranty	2 years
Cord Length	6 ft
Length	9 inches