Dremel 670 - General Power Tool Safety Warnings; Work Area Safety; Electrical Safety

GENERAL POWER TOOL SAFETY WARNINGS
!
WARNING
READ ALL SAFETY WARNINGS, INSTRUCTIONS,
ILLUSTRATIONS AND SPECIFICATIONS PROVIDED
WITH THIS POWER TOOL.
Failure to follow all instructions listed below may result in electric shock,
re and/or serious injury. Save all warnings and instructions for future
reference. The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
a. Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b. Do not operate power tools in explosive atmospheres, such as
Power tools
create sparks which may ignite the dust or fumes.
c. 
Distractions can cause you to lose control.
ELECTRICAL SAFETY
a. 

power tools. Unmodied plugs and matching outlets will reduce risk of
electric shock.
b. 
There is an increased risk
of electric shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
d. 

Damaged or entangled cords increase the risk
of electric shock.
e. 
suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f. 
Use of an RCD
reduces the risk of electric shock.
5