Dremel 7350 - Page 16

16
Symbols
Important: Some of the following symbols may be used on
your tool. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the
tool better and safer.
Symbol Designation / Explanation
V Volts (voltage)
A Amperes (current)
Hz Hertz (frequency, cycles per second)
W Watt (power)
kg Kilograms (weight)
min Minutes (time)
s Seconds (time)
⌀ Diameter (size of drill bits, grinding wheels, etc.)
n
0
No load speed (rotational speed at no load)
n Rated speed (maximum attainable speed)
.../min
Revolutions or reciprocation per minute (revolu-
tions, strokes, surface speed, orbits etc. per
minute)
0 Off position (zero speed, zero torque...)
Arrow (action in the direction of arrow)
Alternating current (type or a characteristic of
current)
Direct current (type or a characteristic of cur-
rent)
Alternating or direct current (type or a character-
istic of current)
Class II construction (designates double insulat-
ed construction tools)
1605A000DGAB 02-21 7350_7300-PGT 6/2/21 9:21 AM Page 16