7
MODE SELECTION & SETTINGS
MODE SETTINGS
To change the settings of
the current mode press the
button, this will move the
highlight block from the mode
icon onto each setting in turn.
VIDEO MODE
(Green LED) Press the
button to start recording. The
Status LED and LCD backlight
will flash red to indicate
recording. Press the button
again to stop recording.
VIDEO SETTINGS
●
Resolution
●
Frame Rate
PHOTO MODE
(Yellow LED) The camera will
capture still images when the
button is pressed, and the
status LED and LCD screen will
flash red each time a photo is
captured.
PHOTO SETTINGS
●
Resolution
TIMELAPSE MODE
(Purple LED) Press the
button to capture a series
of still images at a specified
rate. The Status LED and LCD
screen will flash red each time
an image is captured. To stop
recording, press the button
once more.
To Next Page
Loading...
Need help?
General
