DRIFT HD Ghost Quick Start Guide

13
TURNING ON AND OFF
In the Camera Settings
menu, highlight the ‘WiFi’
option and press ACTION,
and select
P
and press
ACTION.
In Live Preview, wait for the
WiFi indicator icon @ to
show WiFi is enabled then,
on your WiFi device, select
the network ‘HD Ghost’.
UPDATING THE FIRMWARE
Download the latest firmware
from the Drift website (left)
and copy the .bin file to a
formatted micro SD card.
Insert the micro SD card
into the camera and power
on. The camera screen will
display ‘Firmware Updating’
as the update is installed.
Once complete, the camera
will power down. To check
the firmware has updated
correctly, power the camera
on and, from the Main menu,
open the Camera Settings
menu and select ‘Version’ to
view the current firmware.
DOWNLOAD THE DRIFT APP
Shot setup,
record, capture
and playback on
your device.
wifi firmware
NOTE - The WiFi setting will be activated by firmware update
once the Drift App for Apple® and Android® is available.
Please check the Drift website for more information and
app release dates: driftinnovation.com

DRIFT HD Ghost Specifications

General

Video resolutions	1280 x 720, 1280 x 960, 1920 x 1080 pixels
Maximum frame rate	120 fps
Supported video modes	1080p, 720p, 960p
Video formats supported	H.264, MOV, MP4
Maximum video resolution	1920 x 1080 pixels
Photo mode	Yes
Sensor type	CMOS
Light exposure modes	Auto, Manual
Display diagonal	2 \
USB connector type	Mini-USB B
USB 2.0 ports quantity	1
Internal memory	0.256 GB
Compatible memory cards	microSD (TransFlash), microSDHC
Maximum memory card size	32 GB
GPS (satellite)	No
Product color	Black
Protection features	Water resistant
Battery voltage	3.7 V
Battery capacity	1700 mAh
Battery life (max)	- h

Weight and Dimensions

Depth	33 mm
Width	52 mm
Height	105 mm
Weight	167 g