www.petfountain.com
1) Stainless Steel Bowl: The Stainless Steel Bowl is the foundation of
the fountain. The circular bowl piece can be carried by simply gripping
underneath the sidewalls of the bowl.
2) Stainless Steel Cone: The Stainless Steel Cone serves as the housing
for the fountain components and encloses the pump from curious pets.
The Cone acts to reduce the splash and sound of the falling water.
3) Filter Housing: The Filter Housing slides into the opening at the top of
4) Filter
be placed in the Filter Housing with the tab facing upwards for easy
placement and removal.
5) Filter Housing Lid: The Filter Housing Lid is a screw on lid that
base piece to attach the interchangeable spout rings & Flow Control
Cap.
6) Interchangeable Spout Rings
can be easily changed based upon your pet’s preference and can
provide up to 5 streams of water for multiple pet households.
7) Flow Control Cap: The Flow Control Cap is attached to the top of the
8) Pump: A small low-voltage submersible pump that can be
disassembled for cleaning. THE PUMP IS NOT DISHWASHER SAFE!
Remove the pump from the fountain prior to cleaning. The pump’s
electrical cord features a detachable inline plug for easy removal.
9) Cord Clips: The three plastic cord clips serve to cover the electrical
cord as it feeds over the rim of the bowl and these clips are required to
hold the cone piece in place.
There are several parts to the Stainless Steel Drinkwell
®
360™
that will be described here in detail.
UNDERSTANDING THE DRINKWELL
®
PARTS
pg. 9
To Next Page
Loading...
