To Next PageTo Next Page
Need help?Do you have a question about the DriSteem GTS SERIES and is the answer not in the manual?
General| Type | Gas-to-Steam Humidifier |
|---|---|
| Fuel Type | Natural Gas or Propane |
| Installation | Floor-mounted |
| Heat Exchanger | Stainless steel |
| Electrical | 120V or 240V |
| Materials | Stainless steel |
| Applications | Commercial and industrial humidification |
Step-by-step instructions for safe operation of the appliance.
Hazards associated with hot surfaces and water in the system.
Instructions for safely disconnecting electrical power before service.
Guidelines for selecting a suitable installation location and required clearances.
Specific instructions for mounting the GTS unit using an outdoor enclosure.
Guidelines for selecting the location and ensuring proper installation of the outdoor enclosure.
Instructions and safety precautions for proper electrical wiring and grounding.
Diagram and notes for piping the tap/softened water supply to the humidifier.
Diagram and notes for piping the RO/DI water supply to the humidifier.
General instructions for making supply water and drain overflow connections.
Specific instructions for connecting tap/softened water supply lines.
Instructions for connecting RO/DI water supply, including warnings.
Instructions for drain piping and the integral water tempering chamber.
General guidelines for installing gas piping to the humidifier.
Procedures for safely testing gas supply piping for leaks.
Guidelines for providing adequate combustion and ventilation air for room air combustion.
Information and requirements for sealed combustion installations.
Checklist of items to verify before starting up the GTS humidifier system.
Step-by-step procedure for starting up the GTS humidifier.
Checklist of items to verify during the commissioning process.
