Product Manual
PORTABLE DEHUMIDIFIER HT-901
Maintenance and Safety
Do not disassemble or repair on your own
unless you are trained and qualied.
Use rated power source of 220V – 240V.
To extend the lifespan of the lter.
Clean any dirt o the power plug and plug it in fully.
Place the dehumidier in a stable and at position.
Do not damage or twist power cables.
Do not use the unit near water sources.
Do not plug in the power plug
while the switch is on.
Risk of electric shock, and damage
to components.
If unit tilts or turns over, there will be water
spills or seepage, which may damage nearby
objects and result in re or electric shocks.
Risk of re and electric shock if incorrect
power source is used.
Risk of re and electric shock.
Risk of re and electric shock.
Risk of re and electric shock.
Place the lter in a plastic bag when the unit
is not used for extended periods.
Risk of re and electric shock.