EasyManua.ls Logo

Drive 13023 - Patient Lift Maintenance & Care Continued; Hydraulic Pump Operation; Sling Safety and Care

Drive 13023
4 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NOTEHYDRAULICPUMP
1. Use pump to raise boom to position for lifting
patient.
2. DO NOT lift up on end of boom to position for
lifting patient as this causes air to be drawn in
under ram, preventing pump from lifting when
handle is pumped.
3. Do NOT press down hard on handle when bottom
of stroke is reached.
4. It is a common occurrence after a few hours
of non-use for the boom to lower with no weight
suspended from the end of the boom. This does
not indicate a faulty pump but is a trait common to
hydraulic equipment.
5. If trouble develops with the hydraulic pump,
remove it and call your Drive Medical Supplier
to receive an RMA. Provide serial number and date
purchased. Do not attempt to lift someone with a
faulty hydraulic pump.
WARNING
Do not wash slings with bleach. Bleach will damage
material. Sling can suffer damage during washing and
drying.
WARNING
Always check slings before use. Bleached, torn, cut,
frayed, or broken slings are unsafe and could result in
serious injury or death to patient. Destroy and discard
worn slings. Do not alter slings.
patient lift
maintenance & care
continued
www.drivemedical.com

Related product manuals