Drive 13067 User Manual

INSTALLATION GUIDE
How to assemble and adjust overbed table #13067
How to Assemble 13067
1. Open the box and remove all the parts. Verify that all the parts are present.
2. Make sure that the trip rod in the column is fully inserted in the column. If it is not, shake the
column until the trip rod is properly seated.

Drive 13067 Specifications

General

Brand	Drive
Model	13067
Category	Indoor Furnishing
Language	English

Summary

How to Assemble and Adjust Overbed Table

Initial Setup and Component Check

Unpack all parts, verify their presence, and ensure the column's trip rod is properly seated.

Attaching Column to Table Top

Secure the column to the table top bracket using the trip rod and pan head screws.

Installing Trip Lever Mechanism

Insert the trip lever, ensuring it aligns with and sits on the trip rod for proper function.

Securing Base to Column

Prepare the base with bolt sleeves and plate, then attach it to the column using shorter bolts.

Installing Casters and Final Touches

Install casters correctly in the base and remove protective film from the table top.

Operating Table Height Adjustment

Learn to lock casters and adjust table height by lifting or pushing the table top.