Enigma Lightweight Aluminium Wheelchair (LAWC_IFU 12/14) Page 4 of 12
This wheelchair has a number of quick release components and the
wheelchair frame is easily foldable to facilitate a light carry weight
and minimize storage space.
1. Quick Release Wheel.
On the self propel model, the rear wheels
can be removed. To remove the rear
wheel, push the button in the centre of
the wheel hub (shown on the diagram in
grey) and slide the wheel from its axle.
2. Half Folding Back. Follow the previous instructions to fold the
back.
3. Leg Rests. Follow the previous instructions to remove or swing
out the leg rests.
4. Folding the wheelchair.
Grab the centre of the front and rear edges of the seat sling. Pull
upwards on the seat sling and the wheelchair should naturally fold up.
IMPORTANT: The wheelchair is suitable as a seat in a motor vehicle.
Please refer to the relevant section.
To Next Page
Loading...
