Drive R8 - Assembling the Rollator; Unfolding the Rollator

3
4
The diagram below shows a four wheel Rollator.
Remove packaging
Handles /
Brake Levers
Remove the Rollator and all components from the packaging. Lay out the Rollator.
Unfolding the Rollator
Backrest
To unfold the Rollator, lift using the lifting strap which is located under the seat.
Tightening
Handles
Seat
(with Zip
pocket on
underside)
Underseat
Bag
Important:
Always ensure the side braces
are fully down before using.
Rear Wheels
(with Brakes)
Front Castor
Wheels
Assembling the Rollator
Parts Description
Lower the Rollator down onto it’s wheels
and push down on the
central bar to fully open.
Lifting strap
Side brace
Step 2
Step 1