Need help?Do you have a question about the Drive RTL11158KDR and is the answer not in the manual?
General| Brand | Drive |
|---|---|
| Model | RTL11158KDR |
| Category | Mobility Aid |
| Language | English |
Open the commode frame and place it on the floor for assembly.
Slide the hook on the bucket frame over the receptacle on the back of the commode frame.
Insert front cross brace into receptacles and ensure push buttons click securely.
Turn frame upside down and insert legs into receptacles by depressing push pins.
Insert backrest into receptacles on commode frame, ensuring push pins click securely.
Attach toilet seat and cover to the frame, ensuring hooks fit properly.
Lower commode bucket into frame and return the seat to the down position.
Adjust each leg to desired height, ensuring all are at the same level and buttons lock.
Ensure legs are securely locked in place by pushing down or pulling legs.
Ensure seat is down, read instructions, inspect for damage, and check buttons/tips.
Ensure all legs touch floor, tighten hardware, and seek assistance if needed.
To Next Page
