Drive RTL12032KDR User Manual

www.drivemedical.com
Splash Defense™
Transfer Bench with
Curtain Guard Protection
Splash Defense™
Banca de transferencia con
protector de protección
para cortina
Splash Defense™
Banc de transfert avec
espace pour le rideau
Item #RTL12032KDR
lifetime limited warranty
Your Drive brand product is warranted to be free of
defects in materials and workmanship for the lifetime
of the original consumer purchaser.
This device was built to exacting standards and care-
fully inspected prior to shipment. This Lifetime Limited
Warranty is an expression of our confidence in the
materials and workmanship of our products and our
assurance to the consumer of years of dependable
service.
This warranty does not cover device failure due to own-
er misuse or negligence, or normal wear and tear. The
warranty does not extend to non-durable components,
such as rubber accessories, casters, and grips, which are
subject to normal wear and need periodic replacement.
If you have a question about your Drive device or this
warranty, please contact an authorized Drive dealer.
Drive recommends periodic visual inspection of this
product by the user, to ensure that all parts and
hardware are secure, that components are in good
working order and not worn, torn, frayed, or loose,
and that there are no obstructions or impediments
to normal, safe operation. If any part or mechanism
appears to be unsafe or compromised, do not use the
product.
© 2019 Medical Depot, Inc. All rights reserved.
Drive is a trademark of Medical Depot, Inc.
Port Washington N.Y. 11050 USA Made in China
maintenance
Rev0.3.29.19

Drive RTL12032KDR Specifications

General

Brand	Drive
Model	RTL12032KDR
Category	Mobility Aid
Language	English

Summary

maintenance

Periodic Inspection

User should inspect parts for security, good working order, and absence of obstructions for safe operation.

lifetime limited warranty

Warranty Coverage

Covers defects in materials and workmanship for the lifetime of the original purchaser, excluding normal wear and tear.

Exclusions

Warranty does not cover misuse, negligence, normal wear, or non-durable components like rubber accessories.

assembly instructions

Attaching Seat Boards

Align and attach large and short seat boards to U-brackets using push pins.

Attaching Legs

Connect legs with suction cups (A) and rubber tips (B) to seat board receptacles.

Attaching Backrest and Armrests

Insert backrest supports into receptacles and attach armrests to side receptacles.

Final Placement

Place legs with suction cups into the bathtub for use.

adjusting leg height section

Setting Leg Height

Adjust each leg to the same height and lock using push pins for stability.

additional precautions

Pre-Assembly Check

Inspect for shipping damage; do not use if damaged. Ensure all parts are secure.

Usage and Maintenance Precautions

Check leg pins, tighten bolts, inspect rubber tips, ensure floor contact, do not stand on chair, clean with mild soap.