Drop X - Instructions for clearing an air lock

Instructions for clearing an air lock
Connect the chimney pipes to each other and slide the stove’s protective grille to
the bottom of the chimney. Place the chimney on the collar on top of the stove.
Make sure that the chimney’s joint has been pushed all the way through. Make sure
thatthestove’sgrateisinitsownplaceintherebox.
Anairlockcausesthejetstomalfunction.Anairlockisoftencausedbyllingthe
pool too quickly, which results in air being trapped in the piping. This prevents the
pumpfromprellingandthewaterfromcirculatingproperly.
1. Open the service hatch and turn the threaded connection on top
of the pump slightly open.
2. When water starts coming out, tighten the connection and turn
on the pump. The pump will pump for a moment, after which
  thewaterwillstarttoowproperly.
3. Dry any spilled water and close the service hatch. Your outdoor
spa pool is ready for use.