3
English
c o n c i s e i n s ta l l at i o n
What do you need for installation?
No. Installation possibilities Engine Twigs or
pebbles
Frame Alpha
or Beta*
Built-in
plaster
trim**
I
Existing chimney, liner less
With frame X X X
II Frameless X X X
III
Existing chimney, flue liner
With frame X X X
IV Frameless X X X
V
New chimney breast,
flue pipe Ø100
With frame X X X
VI Frameless X X X
* Or other finishing trim or i.e. marble slabs
** The ‘plaster trim’ is always necessary in case of ‘frameless’ installation.
Steps to take:
1. Choose the installation that is applicable for this job
2. Check all necessary parts to be present
3. Follow the steps indicated in this Concise Installation Guide.
These give a general impression of the installation of the fire. For more detail please refer to
the Installation Manual.
Disclaimer:
• This guide does not replace the Installation Manual and should be read in conjunction with the installation ma-
nual
• The Installation Manual gives additional safety warnings and tips.
• DRU or its agent/importer does not accept any responsibility for installation errors
UK
To Next Page
Loading...
