Need help?Do you have a question about the Druck DPI 610E and is the answer not in the manual?
General| Pressure Media | Non-corrosive gases and liquids compatible with 316 stainless steel |
|---|---|
| Type | Pressure Calibrator |
| Pressure Units | psi, bar, kPa, MPa, inHg, mmHg, mbar |
| Current Measurement | 0 to 24 mA |
| Voltage Measurement | 0 to 30 V |
| Power Supply | Rechargeable battery or external power supply |
| Display | Backlit LCD |
| Data Logging | Yes |
| Communication | USB |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Storage Temperature | -20°C (-4°F) |
| Dimensions | 100 mm (3.9 in) |
Overview of the DPI 610E Series instruments, including models and firmware.
Details the items included with the DPI 610E instruments.
Provides technical specifications for the DPI 610E calibrator.
Lists common accessories available for the DPI 610E series.
General safety precautions and warnings for instrument operation.
Outlines maintenance tasks, service procedures, and repair information.
Information on authorized service and repair providers.
Steps for returning the instrument for calibration or service.
Covers instrument battery status, charging, and power controls.
Details the various parts of the DPI 610E instrument.
Explains the instrument's user interface, buttons, and dashboard navigation.
Navigating the instrument's main dashboard and its features.
Detailed instructions for operating the pneumatic pump system.
Instructions for operating the hydraulic pump system.
Introduction to tasks and their configuration on the instrument.
How to select and initiate a task from the menu.
Managing shortcuts for tasks on the dashboard screen.
How to set the instrument's date, time, and language preferences.
Adjusting the screen backlight for optimal viewing.
Configuring the USB connection mode for data transfer.
Configuration of the instrument's auto power down feature.
Feature to lock the touchscreen for controlled navigation.
Option to enable or disable the Hold function on the main screen.
How to access the instrument calibration menu.
Procedure to change the advanced menu PIN.
Steps for loading and upgrading the instrument's firmware.
How to reset the instrument to its factory default settings.
Explanation of the elements on the Calibrator Task screen.
How to adjust the display layout of the channel windows.
Procedure to change the units displayed for channel measurements.
Understanding and interpreting out-of-range error messages.
Lists functions available for CH1 and CH2 with combination matrix.
How to configure internal and external pressure measurements.
How to use Sum and Difference functions for pressure readings.
How to measure and source electrical current using CH2.
How to measure voltage and millivolts using CH2.
How to set up and use the HART communication protocol.
Configuration of process options like Tare, Min/Max/Mean, and Filter.
How to enable Flow and Alarm functions for channel readings.
Method for configuring custom measurement units using scaling.
How to perform a leak test on equipment or systems.
How to test pressure switches and devices with switch contacts.
How to simulate a pressure transmitter using current output.
Procedure for testing vacuum relief valves.
Introduction to the PM700E external remote pressure sensors.
Guidelines for observing media compatibility with PM700E sensors.
Steps for connecting and setting up PM700E sensors.
Lists compatible external pressure sensors for the DPI 610E.
Steps to configure a channel with an external pressure sensor reading.
Information on connecting and using RTD probes and interfaces.
How to configure channels for RTD sensor measurements.
Details on setting up and copying RTD profiles.
Options for configuring data logging parameters.
How to change the default filename for data log files.
Selecting data log trigger modes (Key Press, Periodic).
Configuring time interval, duration, and data points for periodic logging.
Steps for initiating and controlling manual data logging.
Steps for initiating and controlling periodic data logging.
How to view, delete, or transfer data log files.
Introduction to the Analysis application for calibrating transfer characteristics.
How to start the Analysis application and configure channels.
Setting up input/output functions, start/end values, and linearity.
Calculating and defining error types for analysis.
Defining tolerance limits for calculated result error.
Introduction to the Documenting application for calibration records.
How to select and manage internal test procedures.
Steps for creating new internal test procedures.
Entering DUT, environment, and user ID details for tests.
Description of the components on the Documenting Main screen.
A step-by-step example of a testing session.
How to view As-Found and As-Left calibration results.
How to connect and establish HART communication with devices.
Configuring the HART device, including poll address and range.
Navigating the HART dashboard and accessing device information.
Performing HART service methods like Loop Test and D/A Trim.
Steps to navigate to the instrument calibration menu.
Detailed steps for calibrating electrical and pressure functions.
How to calibrate the instrument's internal pressure sensor.
Steps for calibrating the instrument's internal barometer.
Menu for calibrating external pressure sensors.
Steps to calibrate the external PM700E pressure sensor.
Setting calibration dates and intervals for external sensors.
Menu for calibrating external RTD sensors.
Steps to calibrate external RTD sensors.
Setting calibration dates and intervals for external RTD sensors.
Steps to navigate and access files stored on the instrument.
Managing calibration files, including export and types.
Viewing, deleting, and managing data log files.
Viewing and deleting saved leak test results.
Viewing and deleting saved switch test results.
Viewing and deleting saved relief valve test results.
Accessing instrument files on a PC via USB connection.
Overview of the information available in the Status menu.
Steps to access the Status menu from the Dashboard.
How to view installed software build versions.
Viewing calibration status for instrument and sensors.
How to check the current instrument battery level.
How to view the instrument's internal memory usage.
How to view details of the instrument and external sensors.
How to export and view operational software or firmware errors.
How to export and view significant instrument events.
Manufacturer contact information and website.
To Next Page
