Need help?Do you have a question about the Druck DPI611 and is the answer not in the manual?
General| Pressure Type | Gauge, Absolute, Differential |
|---|---|
| Electrical Measurement | Yes |
| Pressure Range | -1 to 20 bar |
| Display | LCD |
| Power Supply | Rechargeable battery or external power supply |
| Communication | USB, RS-232 |
| Operating Temperature | -10 to 50°C |
| Storage Temperature | -20°C to 70°C |
| Voltage Measurement Range | 0 to 30 V |
General safety precautions and warnings for operating the DPI611 pressure calibrator.
Critical warnings regarding media, instrument use, and hazardous locations.
Safety guidelines for electrical connections and power supply.
Steps for preparing the instrument, including initial checks and battery installation.
Instructions to turn the DPI611 power on, off, and use standby mode.
General instructions for downloading and upgrading software.
Instructions for attaching and removing the device under test.
Example for measuring/sourcing current with internal loop power.
Example for measuring DC Volts or DC mV on CH1.
How to set up and perform a leak test utility.
How to set the pressure module to zero using the settings menu.
How to start, stop, and operate the data logging function.
Troubleshooting common issues with pressure generation.
Troubleshooting for connectivity and responsiveness problems.
To Next Page
