Druck DPI 620 Genii User Manual

User Manual Druck DPI620 Genii
GE Measurement & Control
Dru
ck DPI 620 Genii
Advanced Modular Calibrator
K0541
© 2014 General Electric Company. All Rights Reserved. Specifications are
subject to change without notice. GE is a registered trademark of General
Electric Company. Other company or product names mentioned in this
document may be trademarks or registered trademarks of their respective
companies, which are not affiliated with GE
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com

Druck DPI 620 Genii Specifications

General

Accuracy	0.005% FS
Communication Interfaces	USB, Ethernet, WiFi, Bluetooth
Modules	Interchangeable pressure modules
Operating Temperature	-10°C to 50°C (14°F to 122°F)
Battery Life	8 hours typical
Pressure measurement type	Gauge, absolute, differential, vacuum
Pressure Units	psi, bar, mbar, kPa, MPa, inH2O, mmHg
Display	Full-color touch screen

Summary

1 Overview

1.4 General Safety Precautions

Details essential health, safety, and working practice regulations for operation.

1.6 Electrical warnings

Provides warnings and guidelines for safe electrical operation and connections.

1.9 Install the Battery

Step-by-step instructions for installing the instrument's battery.

2 Electrical Operations

2.1 Basic Calibrator Operation

3 Pressure Indicator Operation (MC620)

3.2 Pressure Connections

Details procedures and safety warnings for making pressure connections.

4 Data Logging Operation

4.1 Set-up

6 HART® Operations

6.1 HART® Menu Operations

Outlines typical operations performed using the HART communicator.

6.2 Start-up

6.12 Editing Values

Explains how to edit and update values for HART devices.

7 HART® Offline

7.4 Create an Offline Configuration

8 Foundation™ Fieldbus

8.2 Start up

8.4 Scanning For Devices

8.5 Device Focus View

9 Calibration Procedures

9.1 Before Starting

9.2 Procedures (CH1/CH2): Current (measure)

Step-by-step guide for calibrating the current measure function for channels.

9.4 Procedures (CH1/CH2): DC mV/Volts (measure)

Detailed steps for calibrating DC millivolts and volts measure functions.

9.8 Procedures (CH1): Resistance measure)

9.14 Procedures: Pressure Indicator Modules (PM 620)