DSAN Limitimer PRO-2000 User Manual

1
©DSan Corporation Limitimer® Rackmount User Guide
Rackmount
Model: PRO-2000
RM
Limitimer PRO-2000
RM
is a speaker timer system for studio installation. Housed in a 1U rackmount
enclosure, it combines the Limitimer controller with an Ethernet port and a serial data port to popular
touch panels and show control systems. It can drive Limitimer signal lights by hardwire, over Bluetooth
wireless, or across local and wide area networks. It can also be controlled by other client-configured
timers in the Limitimer family.
Front DIP switches allow for easy access to set sound cues, volume, counting format, seconds display,
and wireless channels. Through a front panel USB port, a PC can access user guides, set-up examples
and touch panel interface documents, as well as store personal documents or launch an application to
configure network properties (IP address, gateway, mask, port and DHCP).
Contents
Page
Timer Operation
……………………………………………………….
2
Signal Light Connections……………………………………………
3
Wireless
Operation……………………………………………………
4
DIP Switch Settings……………………………………………….……
5
Network Configuration………………………………………………
7
Serial Connection………………………………………………………
9
Accessories……………………………………………………………….
10
Setups……………………………………………………………………….
1
2
Specifications……………………………………………………………
1
4
Warranty………………………………………………………………….
1
4
Support…………………………………………………………………….
1
4

DSAN Limitimer PRO-2000 Specifications

General

Model	PRO-2000
Voltage Rating	100-240V AC
Timer Modes	Countdown
Control	Buttons
Power	AC Adapter
Battery Backup	Yes
Type	Professional Timer