DSAN Limitimer PRO-2000 - Specifications; Warranty Information; Customer Support

14
©DSan Corporation Limitimer® Rackmount User Guide
Specifications
Program Presets
4
Additional preset
s
and programmed operation
may
be managed by
a
touch panel or show control systems
Signal Light
Ports
3
2 in back. 1 in front. RS
-
485 data communications over Cat
-
5 cable
with 12-volt power allows long runs (1500 feet), multi-drop, or daisy-
chain configurations. Additional signal lights via Bluetooth wireless.
Network Ports
1
Windows application
is
st
o
red in flash memory
in order
to
configure IP
address, client/server designation, gateway, mask, and DHCP or static
IP
Wireless
Channels
4
Integrated Class II Bluetooth transceiver. Can support up to 7
Bluetooth receivers. Four timer-signal light networks can operate
without interference on 4 unique channels. Effective wireless distance:
300 feet.
Serial
Connections
1
RS
-
232 port supports ASCII
-
based API.
Transmits count
-
down time o
f
the active program as well as the state of green-yellow-red phase
lights. Receives any command corresponding to the buttons on the
timer.
Power
110
-
220
VAC
Provi
d
ed 1
-
Amp power supply can drive timer and two
PSL
-
20V
signal
lights. Larger power supplies, power booster hubs, or local power
supplies available
Sounds
3
Selectable: Beep, Chime, Buzz, None.
Sounds are set locally. The timer emits a sound flag in the timer
message if the timer sound switch is engaged. Local signal lights will
emit the sound if Beep, Chime, or Buzz is selected.
Weight
4
lbs.
(with power
supply)
Dimensions
Standard 1U
r
ac
k
mount chassis.
1.7
5
" (H) x 8.0" (D) x 17.0" (W)
Warranty
Dsan warrants that the products it sells shall be free from material defects in materials and workmanship and will materially
conform to any applicable specifications posted on the Dsan website. Such limited warranty will be effective for one (1) year
from date of delivery. For any product under the warranty, Dsan shall provide buyer with a replacement product; repair the
product; provide replacement parts for the product; or provide a refund to buyer of the sale price of the product, upon return
of the defective product. To report a defective product, please email Dsan at support@dsan.com, and Dsan will provide
instructions for remedy of the defective product. In the email, please include full name, address, name of product, explanation
of the defect, and either Invoice Number or Purchase Order Number. Please see Dsan’s Terms and Conditions for our full
limited warranty.
Support
Dsan Corporation
516 625-5608
support@dsan.com