DSC PC1510 - Page 24

20
PROGRAMMING WORK SHEETS
PC1510 Version 4.1
NOTE: In sections [01] to [10], do not enter data into sections that are not used.
[01] 1st Phone Number
Page 11
Enter [0] for the digit 0 in the phone number. Enter [
∗
4
∗
] (HEX D) for additional dial tone detection between
number digits, as in local PBX systems. Enter [#] to end the phone number entry
[02] 1st Account Code
Page 11
Enter [
∗
1
∗
] (HEX A) for the digit “0” in the account code. For a 3-digit code, enter [0] for the 4th digit.
[03] 2nd Phone Number
Page 11
[04] 2nd Account Code
Page 11
[05] Zone Alarm Reporting Codes
Page 11
For single digit reporting codes, enter [0] as the second digit. Enter [
∗
1
∗
] (HEX A) to transmit a “zero”.
Zone 1 Alarm
Zone 2 Alarm
Zone 3 Alarm
Zone 4 Alarm
Zone 5 Alarm
Zone 6 Alarm
[06] Zone Restoral Reporting Codes
Page 11
For single digit reporting codes, enter [0] as the second digit. Enter [
∗
1
∗
] (HEX A) to transmit a “zero”.
Zone 1 Restoral
Zone 2 Restoral
Zone 3 Restoral
Zone 4 Restoral
Zone 5 Restoral
Zone 6 Restoral