To Next PageTo Next Page
Need help?Do you have a question about the DSC PC1565 - VERSION 2.3 and is the answer not in the manual?
General| Partitions | 2 |
|---|---|
| Event Buffer | 128 events |
| Communicator | Built-in |
| PGM Outputs | 2 (expandable) |
| Alarm System Type | Wired |
| Battery Backup | 12VDC, 4Ah |
| Keypads Supported | 8 |
| Communication | Phone line |
| Power Supply | 16.5VAC, 40VA |
| Operating Temperature | 0°C to 49°C (32°F to 120°F) |
Lists conditions that will void the product warranty.
States the terms and limitations of the product warranty provided.
Details system specifications, including zone configuration, outputs, and power requirements.
Lists optional modules and devices compatible with the system for expansion.
Lists the components included in the system package for verification.
Provides a step-by-step guide for installing the security system.
Explains the function of each terminal on the control panel for wiring.
Details how the Keybus is used for module communication and wiring.
Lists current ratings for modules to avoid system overload.
Explains how to assign keypads to slots for proper supervision.
Describes how the system supervises connected modules for security.
Outlines the procedure for removing modules and resetting supervision.
Details different methods for wiring zones, including EOL configurations.
Explains basic arming and disarming procedures using keypads.
Describes how to arm the system in Stay mode and auto-bypass interior zones.
Explains how to program the system for automatic arming at a set time.
Covers special keypad commands for system functions and programming.
Details the default and programmable functions of keypad function keys.
Lists features specific to the LCD5500Z keypad, like scrolling alarms.
Explains how to enter and use installer programming mode for panel configuration.
Describes how to enter decimal data into programming sections.
Details the procedure for entering hexadecimal data in programming.
Explains how to use zone lights to indicate toggle option status.
Describes how to view programmed settings on LED and LCD keypads.
Explains how to program Master, Installer, Maintenance, and User access codes.
Details how to define zone types and their attributes for system operation.
Lists programmable attributes that customize zone behavior, like chime or bypass.
Explains how to assign zones to keypad inputs.
Details communicator dialing options, including pulse/DTMF and force dialing.
Explains how the panel sends reporting codes for various events.
Explains how to use DLS software for remote programming and system management.
Details programmable PGM outputs for controlling devices and functions.
Covers options like Quick Arm, Quick Exit, and bell squawks for arming/disarming.
Details settings for entry and exit delays for zones.
Outlines procedures for resetting the panel and modules to factory defaults.
Describes how to perform a walk test to verify zone operation.
