To Next Page

To Previous Page

Maintenance

With normal use, the system requires minimum maintenance. The following points should be observed.

1.Do not wash the security station with a wet cloth. Light dusting with a slightly moistened cloth should

remove normal accumulations of dust.

2.The battery/ bell test is designed to determine battery condition. We recommended, however, that

the stand-by batteries be replaced every three years.

3.For other system devices such as smoke detectors, passive infrared, ultrasonic or microwave motion

detectors or glassbreak detectors, consult the respective manufacturer’s literature for testing and

maintenance.

Questions and Answers:

Need help?

Do you have a question about the DSC PC5010 - V2.0 and is the answer not in the manual?

DSC PC5010 - V2.0 Specifications

General

Partitions	2
Event Buffer	128 events
Operating Temperature	0°C to 49°C (32°F to 120°F)
User Codes	48
Communicator Formats	Contact ID, SIA
Power Supply	16.5 VAC, 40 VA transformer
Battery Backup	12V, 4Ah rechargeable sealed lead-acid
PGMs	2 (expandable to 14)
Humidity	Up to 85% non-condensing