DSE DSE6120 MKII - 5 Operation; Quickstart Guide; Starting the Engine

Operation
Page 71 of 116 057-236 ISSUE: 2
5 OPERATION
NOTE: The following descriptions detail the sequences followed by a module containing
the standard ‘factory configuration’. Always refer to your configuration source for the exact
sequences and timers observed by any particular module in the field.
5.1 QUICKSTART GUIDE
This section provides a quick start guide to the module’s operation.
5.1.1 STARTING THE ENGINE
NOTE: For further details, see the section entitled ‘OPERATION’ elsewhere in this manual.
...followed by
the Start button
Press the Manual
Mode button...