DSG TH-D437H - Bluetooth Connectivity

18
GB
• The operational range between the unit and the device is approximately 6 metres.
• Before connecting a Bluetooth® device to the unit, ensure you know the device’s capabilities.
• Compatibility with all Bluetooth® devices is not guaranteed.
• Any obstacle between the device and the unit can reduce operational range.
• Keep this player away from other electronic devices that may cause interference.
• The player will also be disconnected when your device is moved beyond the operational range.
Bluetooth® Operation
Pairing the unit with a Bluetooth® device to listen to music:
First time pairing
1. During On mode, press SOURCE on the unit repeatedly or press
PAIR on the remote
control to select Bluetooth® mode. The blue indicator will blink.
2. Activate your Bluetooth® device and select the search mode. “TH-D437H” will appear on
your Bluetooth® device list.
3. Select “TH-D437H” and enter “0000” for the password if necessary. After pairing, the
blue indicator will light up solid.
4. Press and hold SOURCE on the unit or
PAIR on the remote control to clear all pairing
setting. The unit will enter pairing mode, and the blue indicator will blink. Follow step
2-3 to pair your Bluetooth® device.
Bluetooth® device already in the connection memory
1. After entering the Bluetooth® mode, the blue indicator will blink.
2. The unit will automatically reconnect with the Bluetooth® device. After pairing, the blue
indicator will light up solid.
If your Bluetooth® device supports A2DP, play music via your device.
To disconnect the Bluetooth® function, switch to another function on the unit or disable
the function from your Bluetooth® device. You may also press and hold SOURCE on the unit
or
PAIR on the remote control to disconnect the current connection and pairing. The
blue indicator will blink and the unit is now ready for pairing. Follow step 2-3 in “First time
pairing“ above to pair your Bluetooth® device.
Maintenance
Ensure the unit is fully unplugged from the mains socket before cleaning.
• To clean the units, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning uids containing alcohol, ammonia or abrasives.
• Do not spray aerosol at or near the unit.
TH-D437H_IB_Final200915V5.indd 18 16/9/2020 3:28 PM