L
Lisa BartlettAug 8, 2025
What to do if my DSPM Inverter alarm keeps beeping?
- HHeather Pugh MDAug 8, 2025
If the alarm keeps beeping, it might be because the unit is overloaded. Try reducing some of the load.
To Next PageTo Next PageWhat to do if my DSPM Inverter alarm keeps beeping?
If the alarm keeps beeping, it might be because the unit is overloaded. Try reducing some of the load.
How to troubleshoot a DSPM Inverter that doesn’t operate?
If your DSPM Inverter doesn’t operate, with no lights or warning sounds, here are a few things to check: * First, ensure that the input power source is available and the main input circuit breaker is on. * Next, verify that the Emergency Lighting Inverter System input circuit breaker is also on. * Make sure you are pressing the “ON” button for at least 1 second. * Finally, turn off the Inverter and remove all load to check for output short circuits or overloads.
What to do if the battery light is on when powered by utility in my DSPM Cobra 3 Inverter?
If the battery light is illuminated while the DSPM Emergency Lighting Inverter System is powered by utility, it could indicate that the batteries have low voltage or are not properly connected. Ensure the batteries are correctly connected. If you notice any damage to the batteries, contact DSPM immediately.
Why is the utility light blinking on my DSPM Cobra 3?
If the utility indicating light is blinking on your DSPM Emergency Lighting Inverter, the utility voltage might be exceeding the Emergency Lighting Inverter input range. Verify the input voltage.
What to do if the available battery time is too short on my DSPM Cobra 3 Inverter?
If the available battery time is too short, the batteries may not have been fully charged. Keep the Emergency Lighting Inverter System turned “ON” for more than 20 hours to recharge the batteries.
Explains the purpose and application of the DSPM Emergency Lighting Inverter System.
Defines essential terms and acronyms used in the manual for clarity.
Details how the inverter functions, including normal and fault conditions.
Specifies voltage, frequency, efficiency, and power capabilities of the inverter.
Covers battery type, warranty, monitoring, and lamp/load compatibility.
Describes system protection features and self-diagnostic capabilities.
Guidelines for safe handling, initial inspection, and site selection for the UPS.
Step-by-step instructions and safety precautions for battery installation.
Procedures for making secure and safe input and output power connections.
Explains front panel controls, indicators, and how to interpret event logs.
Detailed steps for safely powering the UPS on and off.
Describes available optional modules and features for enhanced functionality.
Outlines available service contracts, inspections, and warranty support.
Specifies the terms, conditions, and limitations of the product warranty.
Includes figures, tables, and final notes for reference.
General
