DT Research DT301 - Tablet Operation and Power Management; Internal Battery Handling; Powering On and Off Procedures



DT301

OPERATION

Internal Battery
Warning !
TheInternalbatterypackshouldonlybe replacedbyanauthorizedDTResearchservicerepresentative.
Pleasecontactyourproductand/orserviceproviderforinternalbatteryreplacementservice.
Powering ON and OFF
ToactivatetheDT301,pushandquicklyreleasethePowerButton.Thedisplaywillcomeoninafewseconds.
ToputtheDT301inStandbymode,pushandquicklyreleasethePowerButton.ToturntheDT301offfor
extendedstorage,poweroffsafelyusinganysoftwarefunctionthat“shutsdowncomputer”providedinthe
softwareoperatingsystem.

NOTE:
Thebatterypacksshippedwithyourtabletmaybelowinpower—pleaseusetheAC‐DC
adapterwiththeDT301whensettingupforthefirsttimetofullychargetheinternalbattery
pack.Youmaychargetheexternal batterypackwithitattachedtotheDT301,orwiththe
optionalexte
rnalbatterychargerkit.

NOTE:
Whenthebatterypack(s)is(are)charging,theblue‐coloredBatteryLEDshouldblinkslowly.If
pluggingintheAC‐DCadapterdoesnottriggerthis blinkingactivityandtheLEDstaysdark,
thebatterypack(s)mayhavebeendrainedsubstantially.Tryunplugging/repluggingthe
AC‐DCadaptertotheDT301afewtime
stoactivatethechargingprocess.

NOTE:
Toconservepower,use(pushandquickrelease)thePowerButtontoputthetabletin
“Standby”modewhilenotinuse.Pushingbrieflyonthesamebuttonwillwakeupthesystem
withinseconds.

NOTE:
AvoidusingthePowerButton(“hold4+seconds”feature)toturnoffthetablet—thisformof
hardwareshutdownisintendedtobeameansofrecoveryfromlockups,andnotasnormal
operation.





ENGLISH 4
