Need help?Do you have a question about the DTF STATION Aries 113 and is the answer not in the manual?
Download and install the DigiRip RIP software from the provided link.
Open the downloaded DigiRip installer application.
Proceed through the installation by accepting the license agreement.
Select installation type and program folder.
Observe the software download and installation process.
Enter activation code and register the printer.
Use device management to add the Aries 113 printer.
Set up TCP/IP with the IP address 127.0.0.1.
Confirm that the software queue has been successfully added.
Copy, locate, and unzip the Hosonsoft software from the USB.
Open the extracted folder to locate PrintExp_X64.exe.
Refer to video instructions for Printexp installation.
Collect all necessary tools for printer assembly.
Connect the base components securely, noting left/right orientation.
Attach and tighten the fixing bars to the printer base.
Install the media holder bracket and the take-up system.
Attach the take-up system and its crossing bar bracket.
Mount front brackets and install the bar with the take-up system.
Carefully position and secure the printer onto the assembled base.
Connect power cords, waste ink bottle, and ink tubes.
Complete setup by trimming hoses and connecting covers.
Connect printer, remove protective plate, and link network cable.
Shake ink, pour ink, install B film, and secure bracket.
Mount B film bracket, front core, A film, and cross bar.
Feed A film through pinch roller, install back core, and detach film.
Tape film, laminate, initialize, and activate front take-up system.
Perform ink loading and print head cleaning procedures.
Verify print head functionality by checking nozzle patterns.
Follow specific steps to protect the printer during extended non-use.
Execute necessary cleaning and maintenance tasks.
Ensure the printer's main power remains connected.
Be aware of the printer's automatic cleaning function every four hours.
Visual representation of electrical connections for printer components.
Details the 1-year warranty for non-consumable parts.
Clarifies which components are considered consumables.
Specifies warranty for printheads (6 months in US).
Outlines steps to activate and maintain warranty coverage.
Requirement for training by DTF Station-approved technicians.
Details available on-site setup and training service types.
Specifies how the warranty start date is established.
Explains the 30-day return window and valid return reasons.
Lists actions and circumstances that invalidate the warranty.
Describes the process for obtaining part replacements or unit exchanges.
Identifies specific damages and conditions not covered.
Outlines procedures for resolving disputes and arbitration.
Covers additional rights and governing law.
General| Brand | DTF STATION |
|---|---|
| Model | Aries 113 |
| Category | Printer |
| Language | English |
To Next Page
