Need help?Do you have a question about the dtm stark and is the answer not in the manual?
General| Brand | dtm |
|---|---|
| Model | stark |
| Category | Transmitter |
| Language | English |
The transmitter's display unit for numerical information.
Buttons used to operate the transmitter's functions.
Keypad for entering numbers, e.g., for remote selection.
Buttons used to navigate and select remote numbers.
Procedure for entering the remote control number via the keypad.
Action of pressing a function button to activate the remote control.
Requesting confirmation by short-pressing a function button.
Sending a radio signal without requesting receiver confirmation via long-press.
Procedure for securing the holder to a surface using pins or bands.
Action of placing the transmitter into its mounted holder.
How the transmitter signals a low battery status using the 'Lo' message.
Steps for replacing the transmitter's battery, including unscrewing housing and polarity.
Information on updating the transmitter's firmware via USB and a dedicated application.
To Next Page