8
Glossary
Words & Terms Description
Micom-pack
Package of a parameter file etc. which supports specific MCU. It can be
available from our website. Micom-pack is a self-
extraction file (EXE file).
You can extract the file by double-clicking it.
Contents of Micom-pack are Parameter file (.PRM), manuals
(.PDF), write
control program (.BTP), and readme file etc. Contains of the file vary
depending on the MCU
Definition program
MCU-specific program to communica
te each MCU. This is placed the each
YIM folder in the SD card.
Definition license
To download
the definition program into YIM folder, a definition license
has to be added into the SD card for each definition program.
This definition license file (.LCT file) can be downloaded if you register
your information in our website by referring to the defini
provided when you purchased the definition program.
The definition license file can be added onto the dedicated SD card by
using SWX600.
Probe logic license
To connect and communicate with the target system, you need a
communication l
ogic on the main unit side according to the connection
destination. Probe logic license which enables this logic (.LPC) can be
downloaded if you register your information in our website by referring to
the definition license sheet provided when you purchas
program.
The definition license file can be added onto the dedicated SD card by
using SWX600.
Programming Programming means to program the flash memory.
To Next Page
Loading...