What to do if my Dualit Blender hand blender does not turn on?
If your Dualit Blender hand blender does not turn on, first ensure it is properly connected to the power supply by checking that the plug is correctly inserted into the socket and the switch is turned on. If it still doesn't turn on, the unit’s thermal fuse may have activated. To resolve this, stop, unplug the blender, allow it to cool down, and then restart it.
How to prevent splashes when using Dualit Blender?
Splashes during blending with your Dualit Blender can occur because the unit has very powerful blades and attachments which rotate very fast. To prevent this, dip the wand into the mixture before turning the power on. Also, try using a deeper bowl or jug, even when blending small mixtures. Adjust the speed by setting the speed wheel to a slower setting initially, then gradually increase the speed as you blend. Ensure that you do not exceed the MAX mark on the sides of the wand while blending.
What to do if the mixture is not blending in Dualit Blender?
If the mixture is not blending properly in your Dualit Blender, it might be due to exceeding maximum volumes. Refer to the max loadings chart and blend ingredients in smaller batches. Also, if ingredient chunks are too large, try chopping them into smaller pieces before blending again. Ensure you are using the appropriate speed for the ingredients; start with a slower speed, pulse, and gradually increase the mixer speed. The blade may be damaged, contact Dualit for further advice and spares information.
Why does my Dualit Blender body get hot?
If the body of your Dualit Blender gets hot, it may be because the unit has been used for an extended period. Allow the unit to fully cool down. Remember, your hand blender is designed for intermittent use due to its powerful motor. Some heat is normal, especially on hot days; however, never leave the blender to rest in direct sunlight. Ensure you store the blender in a cool, dark place.
General| Power | 700W |
|---|---|
| Material | Stainless Steel |
| Turbo function | Yes |
| Cord Length | 1.5m |
| Attachments | whisk |
Crucial safety guidelines to prevent injury and appliance damage during operation.
Steps to prepare the appliance before initial operation and cleaning advice.
Overview of the main body, accessories, and their labeled parts.
Instructions for liquidising or mixing ingredients with the wand.
Guide to connecting and disconnecting blender attachments from the main body.
Steps for assembling and operating the chopper bowl and gearbox accessory.
Guide to attaching and using the balloon whisk for whipping.
Chart for ingredient quantities and recommended processing times for attachments.
Advice on ingredient preparation, speed control, and specific techniques.
Procedures for cleaning parts and maintaining the appliance's functionality.
Guidelines for proper storage of the hand blender after cleaning.
Solutions for common problems encountered during blender operation.
Essential ingredients and daily applications like smoothies and coffee.
Recipes for various soups and sauces, including watercress and avocado.
Recipes for dips, pâtés, and spicy dishes like satay sauce.
Instructions for curry paste and sweet fruit jellies.
Recipes for frothy crème anglaise and a fruity ice cream drizzle.
Details warranty terms, coverage, and product return procedures.
To Next Page
