Dualtron Storm User Manual
12
Step3
Driving mode and motor system selection
Emergency light
Motor
system
3) How to stop
Step1 Step2
Be sure to use the rear brake first for
decelerating when stopping while driving.
For safe stop, it is necessary to practice slow
down after deceleration with rear brake.
Always use the front and rear brake
levers together to stop smoothly and
safely after decelerating with the rear
brake.
Rear brake use Front brake use
Step4
Set the use and strength of the electronic
brake among the detailed functions of the
instrument panel before driving. When the
brake lever works, the electronic brake works
together to increase the braking force.
Deceleration and braking using
electric brake
•For safe braking, check whether the brake lever and disc caliper connection (wire damage, external breakage, etc.) are
damaged before and after driving, and check brake wear and looseness of brake inner core(Inner wire). In the case of
hydraulic brakes, it is also necessary to check the oil leakage or deficiency and always check that the braking force is sufficient.
•Due to various factors such as road surface condition and speed, it may not be possible to stop when brake is operated as
expected. The electronic brake and ABS functions are auxiliary functions to further increase the braking force and used. The
user should understand the function and expe
ct the operation timing when use this function.
Check for safe braking
Tip
1. Fold handlebar and steering tube
Folding lock
After folding the handle bar, unscrew
the QR lever outward and lay the
steering tube down while raising the
fixed slide.
When the steering tube is folded, it is fixed
by using the locking slide and QR lever,
then it is easy to move by attaching the
handle with the folding lock device (not
available when mounting the seat mount).
2.Fixing the folding part
Finishing
screw
QR lever
Locking slide
Steering tube
4) Product folding
Not
press
function off
press
function on
Horn
To Next Page
Loading...
