09
Dualtron Storm User Manual
Product components
Charger
Basic tool
Main body
LED Remote
control
Checking the components inside of the box
Top : Default battery charger(1.75A), Default tool, User manual, Remote control
Bottom : Body(Lithum battery included)
Assembling of the instrument
panel, brake
-Locate the instrument panel and tighten
the fixing bolts.
-Adjust the position of the brake and
tighten the fixing bolts with a 5mm hexagon
wrench.
Make a note of the serial number.
The serial number
can be used to check
information such as date
of purchase, warranty
period, etc., and product
information can be
checked even if the
product is lost or stolen.
(May vary depending on
branch office situation.)
Ejecting the product
Do not hold the handlebar only when lifting the
product from the box.
Please be careful that the fixing slide of the folding
part may be damaged, and a safety accident such
as a part of the body may be caught.
Therefore, when lifting the product, it is
necessary to rai
se the handle bar first, and then
slowly lift the body (footrest) of the product with
both hands and do not damage the folding part
Caution
To Next Page
Loading...
