To Next PageTo Next Page
Need help?Do you have a question about the Ducati 96981061A and is the answer not in the manual?
Indicates instructions that, if not followed, can lead to dangerous situations, severe injuries, or death.
Indicates instructions that, if not followed, can cause damage to the vehicle or its components.
Provides useful information related to the current operation or procedure.
Highlights parts in grey with numeric references (accessory) and alphabetic references (original).
Operations must be performed carefully as they may negatively affect rider safety. Consult technician if unsure.
Assembly requires the bike's Workshop Manual and potentially a spare parts table.
On the motorcycle's right side, loosen screws (A1) and remove the RH heel guard (A). Clean residue.
On the motorcycle's left side, loosen screws (B1) and remove the LH heel guard (B). Clean residue.
Ensure all components are clean and in perfect condition before installation to prevent damage.
Exercise care when tightening screws on carbon parts to avoid damage from over-tightening.
Assemble RH heel guard (1) to plate (C) using screws (3) with specified torque. Check threadlocker.
Assemble LH heel guard (2) to plate (D) using screws (3) with specified torque. Check threadlocker.
Indicates instructions that, if not followed, can lead to dangerous situations, severe injuries, or death.
Indicates instructions that, if not followed, can cause damage to the vehicle or its components.
Provides useful information related to the current operation or procedure.
Highlights parts in grey with numeric references (accessory) and alphabetic references (original).
Operations must be performed carefully as they may negatively affect rider safety. Consult technician if unsure.
Assembly requires the bike's Workshop Manual and potentially a spare parts table.
On the motorcycle's right side, loosen screws (A1) and remove the RH heel guard (A). Clean residue.
On the motorcycle's left side, loosen screws (B1) and remove the LH heel guard (B). Clean residue.
Ensure all components are clean and in perfect condition before installation to prevent damage.
Exercise care when tightening screws on carbon parts to avoid damage from over-tightening.
Assemble RH heel guard (1) to plate (C) using screws (3) with specified torque. Check threadlocker.
Assemble LH heel guard (2) to plate (D) using screws (3) with specified torque. Check threadlocker.
General| Brand | Ducati |
|---|---|
| Model | 96981061A |
| Category | Motorcycle Accessories |
| Language | English |
