38
Coolant temperature
This function indicates engine coolant status.
The temperature unit of measure can be selected (°F
or °C).
The reading is indicated as follows:
- if the reading is between -38°F and +102°F (- 39°C
and +39°C) “LO” is shown on the dashboard
(steady);
- if the reading is between +104°F and +248°F
(+40°C and +120°C), the reading appears on the
dashboard (steady);
- if the reading is +250°F (+121°C) or higher, ”HI”
is shown flashing on the dashboard.
Note
In the event of a sensor ”error”, a string of
flashing dashes (”- - -”) is shown and the ”Engine/
Vehicle diagnosis - EOBD” light comes on. (7, fig.
13).
Engine
Diagnosis
STEADY READING
STEADY READING
FLASHING DATUM
FLASHING DATUM
STEADY READING
FLASHING DATUM
FLASHING DATUM
Engine
Diagnosis
°C
°F
fig. 19
STEADY READING
ProCarManuals.com
To Next Page