66
PREPARATION FOR
FIRST USE
Cycling on one’s bike on the road
requires great concentration,tness
and exercise; therefore you need
to slowly grow accustomed to your
new e-Bike!
We recommend starting to cycle on
your new e-Bike by planning short
rides and gradually increasing the
distance. This will enable you to
grow accustomed with the position
of the saddle, the braking system,
the gearshift and the geometry of
the bike.
Below you will nd some steps
worth learning by heart for a
correct use of the bicycle.
– Checking the pressure of the
tyres:
The bicycle is assembled and
shipped with the tyres pumped with
the right pressure; it is however
good practice to carry out a further
check before starting to use the
bicycle. To do so, you need to have
a pressure gauge and a bike pump,
and check whether the pressure is
within the range indicated on the
side of the tyre.
For the sake of safety and to
maintain excellent performances,
you should check the pressure and
the state of wear of the tyres before
each use. If the tyres show excessive
signs of wear or deformation of
the wheel casing, it is important
to replace them before using the
bicycle.
To Next Page
Loading...
