80
CLEANING,
MAINTENANCE AND
STORAGE OF
ELECTRONIC PARTS
We recommend not washing with
high pressure jets, also to avoid
water leaks within the electronic
components. Before cleaning
these components, make sure that
all electric cables are connected
correctly and that on every free port
there is the dedicated closing cap.
Now you can wash your bicycle,
doing so carefully when pointing
the water jet toward the electronic
components..
The duration of the battery pack will
be greater with good maintenance
and care for the bicycle and if it
is stored in a place with the right
environmental conditions: do not
leave the e-Bike for long periods
of time under the sun when it is
not being used and always leave
it in a dry environment with a
temperature between 10 and 20°C.
In the case of long inactivity (e.g.
seasonal break): when you store
your bicycle, make sure the battery
level is 70% or higher. In any case,
charge the batter at least every four
months.
CARE AND
CHARACTERISTICS
OF CARBON
The frame of your Ducati is entirely made in
carbon with UD technology to guarantee rigidity
and lightness.
The carbon with which the frame
of your Pedelec is made is a
synthetic material made primarily
with woven carbon bres that
constitute the foundation panels
with which the structure of the
frame is made.
This special material entails some
characteristics that dierentiate
it from other metallic materials.
Some precautions are necessary to
take care of the bike correctly and to
keep it safe.
If the carbon bre is treated
correctly, with the right treatments
you can make a frame with
remarkable characteristics
compared with a frame made with
another metallic material.
To Next Page
Loading...
