59
DUCATI GATE OPERATORS: A GUARANTEE OF SAFETY & RELIABILITY IN FULL COMPLIANCE WITH THE EUROPEAN REGULATIONS
As Safety is of primary importance,DUCATI’s is proud to ensure that his products and accessories comply with the latest European laws and machinery directives.
SAFETY AND FINAL INSPECTION
The manufacturer guarantees, as tested and cerificate by NEMKO and INTERTEK regulators that their actuators, used with the original control units rlative, when properly installed according to this manual are in
compliance with the European standard EN 12445; EN 12453; EN 12635 and EN 13241-1
Note that the final machine is composed by the gate operator with the gate itself ( structure). The installer by using a specific dynamometer, has to test and certify to the final user that the machine composed by the gate
and the gate opener in their entirety, comply to the EU normsas as required by the specific legislation.
he European Union has passed a series of laws which clearly regulate the automation industry. The full range of DUCATI’s products has been not only tested but also certified by international bodies to comply EN12453
EN12445 norms and ready to be certified on site by the installers.
Any new or existing installation requires a declaration of conformity issued by the final installer. The installer must test the final machine and attest the compliance to the latest European standards concerning impact
forces in case of obstacle detection. Tests must be performed with a dinamoteter in precisely specified positions
DUCATI devices are ready to achieve total safety even when installing in a variety of contexts. Thanks to these standards many businesses in automation industry choose DUCATI technology to ensure their installations
DUCATI SAFETY. CERTIFICATIONS & EU NORMS
We certify that the products listed in this manual are in compliance with EU norms:
EMC - COMPATIBILITA’ ELETTORMAGNETICA
EN55014-1-2006+A1:2009
EN55014-2-1997+A1+A2:2008
EN61000-3-2:2006+A1+A2:2009
EN61000-3-3:2008
LVD - DIRETTIVA BASSA TENSIONE
EN60335 1-2001+A13 2008 + A14 2010
EN60335-2-103:2003 +A11 2009
EN62233-2008
NORMATIVA SICUREZZA DA IMPATTO
EN 13241-1:2003 +A1
EN12453:2000
EN12455:2000
R&TTE - RADIO & TELECOMUNICAZIONI
EN301489-3V.1.4.1
EN 300 220-2V.2.1.2
FCC- USA COMMISSIONE TELECOMUNICAZIONI
FCC ID: OLS137925764 Washington laboratories tested * remote mod.6203
RoHS - RESTRICTION OF HAZARDOUS SUBSTANCES
To Next Page
Loading...
