●
Enter the SETTING MENU.
●
Use the navigation to select "Tire
Calibration" option and press ENTER
●
Select the option and press ENTER
When the calibration procedure the
instrument panel displays the message "Ready"
flashing, the message "Keep Speed" with speed
range and the gear to be maintained by the user to
complete the teach-in procedure. On the RH side is
the reference Riding Mode, current speed and gear
engaged.
The teach-in procedure is allowed only at a
vehicle speed between 48 Km/h (30 mph) and 52
Km/h (32 mph) in the 2rd gear.
When the rider complies with the required
conditions of speed and gear indicated, the
instrument panel system calibration: all
previous information will be displayed showing "In
progress" instead of "Ready".
Calibration is by keeping speed and gear
within the indicated range for 5 seconds.
The procedure can be by holding depressed
the UP for 2 seconds: in this case the
instrument panel shows displays all previous
information, replacing message "In progress" with
message followed by the previous menu
a few seconds.
Ready
Keep Speed
48 - 52 km/h
and Gear 2
Tire Setting
Sport
50
2
Gear
km/h
Fig 115
152
To Next Page
Loading...
