Friction material: BRM10H.
Master cylinder type: PR16/21.
REAR
With fixed drilled stainless steel disc.
Disc diameter: 245 mm (9.6 in).
Brake disc thickness: 5 mm (0.2 in)
Hydraulically operated by a pedal on RH side.
Brake calliper make: BREMBO
Number of pistons per calliper: 2.
Cornering ABS as standard.
Friction material: Ferodo Ferit I/D 450 FF.
Master cylinder type: PS 13.
Master cylinder diameter: 13 mm (0.51 in).
The brake fluid used in the brake system is
corrosive.
In the event of accidental contact with eyes or skin,
wash the area with abundant running water.
Transmission
Hydraulically-controlled slipper/self-servo wet
multiplate clutch controlled by the lever on
side of the handlebar.
Drive is from engine to gearbox primary
via spur gears.
Primary drive: 1.80:1
6-gear gearbox with Ducati Quick (DQS) up/
down EVO, gear change pedal on side of
motorcycle.
Gearbox output sprocket/rear chain sprocket ratio:
16/41
Total gear ratios:
1
st
gear 38/14
2
nd
gear 36/17
3
rd
gear 33/19
4
th
gear 32/21
5
th
gear 30/22
6
th
gear 30/24
Drive chain from gearbox to rear wheel.
Make: DID 525HV3 KAI ZB
Links: 114
The above gear ratios are the homologated
ones and under no circumstances must they be
modified.
330
To Next Page
Loading...
